Blog

The Working Principles of Tow Bars and Their Common Applications

25 June 2021

Car owners can maximise a wide array of accessories to enhance and improve the functionality of their respective cars. Some of these accessories may be intended to add more organised storage for different objects and cargo. Others, alternatively, can be integrated to minimise the impact of collisions.

One accessory that is designed to tow different objects and cargo is a tow bar. Tow bars are devices that are often attached to the back part of the car. These devices allow car owners to connect different type of cargo, trailer, and other similar things without putting too much pressure on the operation of their cars. Since most of the tow bars are generated out of thick steel or metal materials, they are expected to carry out towing operations without expecting serious drawbacks.

Tow Bars and Their Common Applications

But for the tow bar to be useful, a tow bar hitch must be installed first. A tow bar hitch is a device that is directly attached to the back frame of the vehicle. Once a tow bar hitch is installed properly on the rear part of the vehicle, it can subsequently hold the whole tow bar setup, which includes components such as the frame bar, securing pin, tow ball mount, tow ball, wiring, and the tow bar itself.

For the whole tow bar setup to be effective, its components must match the type of vehicle. They must also handle the intended towing load of the car owners. Failure to meet these basic elements would only lead to the disconnection of the vehicles and trailers. Worse, it may cause hazards on the road.

Tow bars and other components, as previously mentioned, are located on the back of a working vehicle. The trailer and other things that will be towed are then attached to the tow bars. They must, however, be equipped with base plates or brackets on their front end so that they can be connected. Some of the most common applications of tow bars include the towing of trailers, caravans, and cycle carriers.

Primary Working Principles of Tow Bars

To install the tow bars and other components to the vehicle, it must be parked on a level surface first. Then, the vehicle owner or the installer must make sure that the installation height between the hitch and base plate will be within three inches. The tow bar shank must subsequently be inserted into the receiver on the working vehicle and secured with a pin and clip.

The trailer or other things that will be towed must then be parked behind the working vehicle. At this point, the attachment tabs must be inserted into the base plate receivers of the trailer or other things that will be towed. Consequently, the tow bar arms must be attached to the attachment tabs, while the arm and tab connections must be secured with lynchpins. Once all tow bar latches, safety cables, and others are fully locked and attached, the towing operation can finally be done.

If you want to buy tow bars for your car, feel free to call us at Jamieson Auto Fit.

Contact us:

Address: 565 Somerville Rd Sunshine West VIC 3020 Australia
Email: info@jamiesonautofit.com.au
Tel: (03) 9364 8570
Fax: (03) 9364 8567

Optimized by NetwizardSEO.com.au